openConnect Wall Mounts for openGrid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
openConnect snaps with holes in them for mounting the openGrid panels with screws.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 445
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Just the normal openConnect snaps, but with holes added so they could also be used for mounting your openGrid tiles to your wall.
Hole sizes are the same as the ones in grid corners, 4.1 mm for the screw, 7.2 mm for the head.
Includes versions for both openGrid Lite and Full, with offsets of 0mm, 2mm and 4mm. The holes have 3 placements available:
C — hole in the centre of the tile
M — hole in the middle of the connector's bottom edge
B — hole in the flat space below the connector
Also included are covers (for when you have a screw there) and plugs (when no screw is present) for C and M holes. Hole type B doesn't allow you to cover the screw, and the empty one can be capped by Screw Hole Caps | openGrid by Gavin F.