Faraday Seat Tube Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement ST Cover for Faraday e-bikes
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 58
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I cracked the seat tube / cable cover on my Faraday Porteur. I designed a replacement to be able to re-print this part easily with FDM.
A few revs, small non-functional tweaks - see screenshots for clarification
R01 - has a small full round fillet on the edge of the cover
R02 - has a "sharp" here which look better if printed at coarser layers
R03:
Has the full round of R01 but downsized a bit to be a little less visually chunky! Still works great.
Changed the main overhang angle from 40 deg to 45 deg for better printability.
I personally printed this at 0.08 layers with a "Voron"-esque print profile - 4 walls, 10 top layers, 10 bottom layers. The Voron profile is 4/4/4 but at 0.20 mm layer height, so I bumped up the # of walls to match the same final thickness. 40% Gyroid infill.
I'd recommend printing this in something that'll do well outdoors. I printed it in ASA.
Enjoy!