Low-Poly Rhino
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Rhino Bust can be printed with or without eyes (so the eyes could be printed separately in a different color).
- Ocena
- 5 / 5
- Polubienia
- 76
- Pobrania
- 552
- Wydruki
- 3
- Wyświetlenia
- 1777
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Animals
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I've designed this Rhino Bust so it can print with or without eyes (so the eyes could be printed separately in a different color). I've also done it with and without built in supports. This means there are four models to give you all combinations of the options:
• Rhino Bust (with eyes, no supports)
• Rhino Bust (with eyes and supports)
• Rhino Bust (no eyes or supports)
• Rhino Bust (no eyes, with supports)
If you print the eyes separate from the bust... one has an L on it (against the print bed) to indicate that is the left eye. The eyes slide easily into the bust.
For similar models see my Collection of Animal Heads/Busts that I have designed or remixed. All of these designs use the same bracket to mount, making them interchangeable.
Mounting Options:
- Bracket for Wall Mountings - mounts firmly to wall with one screw (use top hole).
- Modular Stand - Print and press together a stand to put this on a table or desk.
- I've also included a small slot, so this can be hung on a wall with a nail.
One minute introductory video for my Bracket for Wall Mountings:
*Enjoy and if you print one please post a make!*