MadBaxRC 3D Printable Remote Controlled Car 1/18 Scale
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1:18 scale 4×4 hobby-grade RC car with a durable 3D-printed chassis. Beginner-friendly, modular, and built for speed.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 135
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
🛠 DIY Hobby-Grade 3D-Printed RC Car
Create your own 1:18 scale 4×4 hobby-grade RC car using this durable, beginner-friendly 3D-printable chassis design.
🚗 Project Overview
Top Speed: Up to 35 km/h (22 mph) with a brushed setup (higher speeds possible with upgrades)
Runtime: Approximately 20–40 minutes per charge
Drivetrain: All-wheel drive (4×4)
Design Goals: Built for strength, modular upgrades, and realistic driving performance
Best For: Makers, RC hobbyists, and DIY beginners
📦 What You Get
STL and 3MF files for the complete chassis
Compatible with PLA, PETG, or Nylon
Designed for standard FDM 3D printers
Parts list (BOM) and build guides linked below
Step-by-step video tutorials available on YouTube
📚 Resources
🧾 Parts List (BOM):
https://itkacher.com/pages/3d-printed-rc-car-parts-list-bom
🛠 Assembly & Printing Tips:
YouTube Playlist
🎥 Durability Tests:
Crash Test & Evolution
⚠ Not Included
Electronics (motor, ESC, battery, servo, etc.)
Pre-assembled components
🔐 License
This project is for personal use only.
Reselling, modifying for redistribution, or sharing the files without permission is prohibited.
⚙ 3D Printing Settings
Detailed printing instructions are available here:
https://www.youtube.com/watch?v=j1goG4zAzGU&list=PL_cMKQPjFnYkGlXbOvDIIxGB8cfsI9lvV