Bottom-Right without Gantry (Ender 3 V3 SE/KE Screen extension)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Short bracket screen extension. Remixed from bottom-right gantry support from https://www.printables.com/model/730007-
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 92
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Hardware used for my install
2x M4x12 bolts
1x M4x20 bolt(I had a power outage and the print quality was mid-poor, ended up using a longer bolt to run into the hole)
3x M4 nuts
The allen key size for the screen is 2.0, M4 also 2.0
This retains the same angle but pushes the factory screen about ¾ of an inch to the right. Didn't measure with my calipers prior to installation.
Not planning on creating a gantry support for mine but when I saw how he designed it, it fit my needs perfectly aside from the hole.