1 / 1
167mm Rod for 608ZZ bearings needed for IKEA 365+ Drybox
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Substitution for M8 threaded rod.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 50
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
These are 3d printed rods for replacing the M8 threaded rods needed for this IKEA drybox model:
It prints alright vertically in a core-xy printer - even though it already flexes around on top. Use a brim for adhesion. Bed slingers probably need additional support structures. I haven't tried printing them flat yet.
It probably works with a flat side and then laid down.
I printed it in PETG without accounting for shrinkage and it fit really well.
