Document Shredder Safety Switch Prodder for Olympia PS 53 CC
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement safety switch prodder for Olympia document shredders
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 36
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
Replacement safety switch prodder for document shredders.
Works for Olympia PS 53 CC and probably many other models.
If you like this design, please consider leaving a ♥heart. Thanks!
----------
Measurements
Prodder width: 3 mm
Prodder length: 13 mm
Prodder depth: 12 mm
Screw type: M3
If that doesn't work for you, you can use FreeCAD to change the parameters in the Params object.
----------
Installation
Carefully remove the broken plastic lip with a knife or similar tool.
Make sure to leave enough standing to slot it into the slit in the printed replacement part.
Align the top of the removed lip with the printed replacement, by iteratively removing additional segments.
Mark the central hole with a nail or similar so that it is visible from outside the container. It should be positioned exactly on the line left by the removed lip.
Drill the hole and place the replacement part temporarily on the outside of the container using one of the screws.
Align the replacement part exactly and mark the tho additional holes at the exact center to guide the drill.
Drill the holes and affix the replacement part from the inside of the container with three M3 screws.
----------
Printing
Filament material: PETG
Resolution: 0.20 mm
Infill: 40 % Grid
Perimeters: 3
Supports: No