Connectable Triangle "Nasa" Fabric with Links, Chain mail, mesh, Armor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Triangles are pretty
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 279
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Share Alike
There are some connectable printable fabrics, there are very few triangle fabrics, but I have not found any connectable triangle ones, so here is my take on it.
In the files you will find sheets in different sizes and all of the single elements to combine as needed (with no, one, two or three opened links for connection)
Printing instructions:
PLA and PETG will be fine (in the photos red is PLA, grey and black is PETG). Speed setting at .2mm should work.
Do NOT lower layer height -> keep at .2mm Trying .1mm to get finer details results in reproduceable fused links that have to be thrown away.
No supports needed. But you might want increase bed adhesion, especially for PETG. (hotter bed, slower printing, etc.)
Misc
In the pictures there is a comparison in size to the original one. My version has to be significantly bigger, because otherwise the links could not be made strong enough. They would break away way to easily.
Still they are the "weak" spots. Printed connections are way stronger, but when connecting multiple ones the result will be strong enough to hold up to some load.