Gameboy Advance (GBA) Case for 4 Games - Yoshi (SC)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Family needed some cases for GBA games, I wanted to do something that that works like a CD cover.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 44
- Wydruki
- 1
- Wyświetlenia
- 1256
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
Family needed some cases for GBA games, I wanted to do something that that works like a CD cover. Here you are :)
This is the 2nd one and has a Yoshi sketch on the top. More to come with some symbols.
If you're interested in this one, you might want to check these, too:
https://www.prusaprinters.org/prints/17569-gameboy-advance-gba-case-for-4-games-harry-potter
https://www.prusaprinters.org/prints/16744-gameboy-advance-gba-case-for-4-games-zelda
https://www.prusaprinters.org/prints/16549-gameboy-advance-gba-case-for-4-games
Print instructions
Category: Games Print Settings
Printer Brand: Prusa
Printer: i3 MK3
Rafts: No
Supports: Yes
Resolution: 0.2mm
Infill: doesn't matter
Filament: Das Filament PLA Kirschrot (cherry red), Sonnengelb (sunny yellow)
Notes:
- Load Yoshi.stl on your print bed and don't move it.
- Print Yoshi.stl in the color of your choice.
- After the print has finished, remove everything that isn't Yoshi (nozzle clean stripe, skirt, the outline of the case, that helps to align everything)
- Change filament to the color your case should be
- Load GbaCartridgeHolder_4_slots_2-Top_Yoshi-Body.stl and don't move it.
- Print GbaCartridgeHolder_4_slots_2-Top_Yoshi-Body.stl.
I tested everything with 9-point calibration and didn't had problems.