Gameboy Advance (GBA) Case for 4 Games - Yoshi (SC)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Family needed some cases for GBA games, I wanted to do something that that works like a CD cover.
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 44
- Makes
- 1
- Views
- 1,256
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution
Family needed some cases for GBA games, I wanted to do something that that works like a CD cover. Here you are :)
This is the 2nd one and has a Yoshi sketch on the top. More to come with some symbols.
If you're interested in this one, you might want to check these, too:
https://www.prusaprinters.org/prints/17569-gameboy-advance-gba-case-for-4-games-harry-potter
https://www.prusaprinters.org/prints/16744-gameboy-advance-gba-case-for-4-games-zelda
https://www.prusaprinters.org/prints/16549-gameboy-advance-gba-case-for-4-games
Print instructions
Category: Games Print Settings
Printer Brand: Prusa
Printer: i3 MK3
Rafts: No
Supports: Yes
Resolution: 0.2mm
Infill: doesn't matter
Filament: Das Filament PLA Kirschrot (cherry red), Sonnengelb (sunny yellow)
Notes:
- Load Yoshi.stl on your print bed and don't move it.
- Print Yoshi.stl in the color of your choice.
- After the print has finished, remove everything that isn't Yoshi (nozzle clean stripe, skirt, the outline of the case, that helps to align everything)
- Change filament to the color your case should be
- Load GbaCartridgeHolder_4_slots_2-Top_Yoshi-Body.stl and don't move it.
- Print GbaCartridgeHolder_4_slots_2-Top_Yoshi-Body.stl.
I tested everything with 9-point calibration and didn't had problems.