CR-10(S) NG v1.2 - coreXY conversion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
NG! Convert your beloved bedslinger into a Next Gen printer. CR-10 into a coreXY CR10NG, no holding back!
- Ocena
- 0 / 5
- Polubienia
- 72
- Pobrania
- 186
- Wydruki
- 0
- Wyświetlenia
- 1979
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
CR10NG / CR-10 NG
version 1.2
REFER FIRST TO E3NG / Ender 3 NG
Check the Differences of the remix compared to the original section in this remix.
Files hosted here will be always up to date, changelog can be found below.
Printables is the main platform for hosting the official STL & STEP part files.
All the important informations, links, details, BOM and other things for the project are on the main website:
More information on CR-10(S/S4/S5/S PRO/*) remix go to
discord-> ENDER 3 NG -> user-mods -> CR10NG - Mod for CR-10 V1
Extrusion Labeling:
ABC | TYPE | SIZE | QTY |
|---|---|---|---|
A | 2040 | 460 mm | 2 |
B | 2040 | 500 mm | 1 (CR10) |
B | 2040 | 509 mm | 1 (CR10S) |
C | 2020 | 400 mm | 2 |
D | 2040 | 550 mm | 2 |
E | 2020 | 400 mm | 1 |
F | 2020 | 415 mm | 1 |
G | 2040 | 400 mm | 2 (ULT-FRAME) |
Bill of Material change:
NAME | PCS | NOTE |
|---|---|---|
8 x 400 mm linear rod | 2 | X axis rods |
8 x 500 mm linear rod | 2 | Y axis rods |
12 x 450 mm linear rod | 2 | Z axis rods |
12 x 420 mm linear rod | (1) | (Z axis rear rod ULT-FRAME) |
T8/8 x 400 mm leadscrew | 3 | Z leadscrews |
DIN rail 500 mm | 2 | (cut to 42 cm length) [steel is cool] |
DIN rail 300 mm | 1 | [steel is cool] |
GT2 6mm x 1600mm closed-loop belt | 1 | Z axis belt for single Z motor config. |
GT2 6mm x 5m open belt | 1 | (Gates) |
note about remix drill guide frame_20_extrusion_drill_guide_bottom_cr10_cr10s
these are for extrusions A on the side of frame_bottom_front_body
Photos for enclosure
CHANGELOG:
2026.07.11 - Milestone: Enclosure.
Added ENCLOSURE V2, MODS LED Diffusers, DXF FILES for enclosure.
See 'Differences of the remix compared to the original'
Added reference photos for enclosure.
Added Z timing belt BoM info.
ENCLOSURE V2 |
|---|
enclosure_v2_lid_rear_right_cr10_cr10s |
enclosure_v2_lid_rear_left_cr10_cr10s |
enclosure_v2_lid_right_middle_cr10_cr10s |
enclosure_v2_lid_left_middle_cr10_cr10s |
MODS |
optional_LED_diffuser_83mm_cr10_cr10s |
optional_LED_diffuser_90mm_cr10_cr10s |
DXF FILES |
enclosure_panel_door_cr10_cr10s |
enclosure_panel_side_cr10_cr10s |
enclosure_panel_bottom_cr10_cr10s |
enclosure_panel_top_cr10_cr10s |
enclosure_panel_rear_cr10_cr10s |
2026.04.14 - Updated the FRAME - BOTTOM rear left and right body plus rear verticals for printability & fitment of 2020 extrusions.
2026.04.13 - Updated the FRAME - BOTTOM rear left and right body for rigidity and removed previous .stl pre-supports.
2026.04.05 - Milestone: all non-enclosure parts uploaded. Added parts:
FRAME - BOTTOM |
|---|
frame_bottom_front_left_body_cr10_cr10s |
frame_bottom_front_left_cap_cr10_cr10s |
frame_bottom_front_right_body_cr10_cr10s |
frame_bottom_front_right_cap_cr10_cr10s |
frame_bottom_front_rod_lock_cr10_cr10s |
frame_bottom_rear_cap_cr10s |
frame_20_extrusion_drill_guide_bottom_cr10_cr10s |
2026.04.05 - Added extrusion labeling image & table to description, and some Bill of Materials table addition.
2026.04.03 - Initial v1.2 posting an incomplete release. Missing parts:
FRAME - BOTTOM |
|---|
frame_bottom_front_left_body_cr10_cr10s |
frame_bottom_front_left_cap_cr10_cr10s |
frame_bottom_front_right_body_cr10_cr10s |
frame_bottom_front_right_cap_cr10_cr10s |
frame_bottom_front_rod_lock_cr10_cr10s |
frame_bottom_rear_cap_cr10s |