1 / 1
Raspberry Pi 5 /Pi 4 Case VESA 75 Anmite 14 Inch Monitor Mount — zdjęcie 1

Raspberry Pi 5 /Pi 4 Case VESA 75 Anmite 14 Inch Monitor Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a compact two-part mount for attaching a Raspberry Pi to the back of a monitor.

Ocena
0 / 5
Polubienia
2
Pobrania
37
Wydruki
0
Wyświetlenia
376
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Noncommercial

Raspberry Pi 5 VESA 75 Monitor Mount Case

This is a compact two-part mount for attaching a Raspberry Pi 5 to the back of a monitor.

The design is made in OpenSCAD and includes:

  • a base plate with the Raspberry Pi 5 mounting pattern

  • a separate vented lid

  • the editable SCAD source

  • printable STL files for both parts

The mount is designed for a 75 x 75 mm VESA pattern and uses 2 VESA screws in one row. It is intended as an unofficial community design for clean monitor-back installation.

Hardware

  • 2 x M4 countersunk screws for the VESA side

  • 3 x M4 countersunk screws for the lid

  • 4 x M2.5 screws for mounting the Raspberry Pi 5 to the printed standoffs

Suggested screw lengths:

VESA screws: depends on your monitor insert depth

lid screws: around 12-16 mm

Raspberry Pi screws: around 6-8 mm

Please verify screw lengths against your own monitor and hardware before final assembly.

Print notes

Print both parts flat on the bed.

0.4 mm nozzle works fine.

0.2 mm layer height is a good starting point.

20-30% infill should be enough for most setups.

Check your slicer preview to decide whether you want supports for your printer and settings.

Included files

base STL

lid STL

OpenSCAD source

Notes

Designed around the Raspberry Pi 5 hole pattern.

The lid is screwed to separate posts, so the Pi mounting points stay free.

Unofficial design, not affiliated with Raspberry Pi.

Use "for Raspberry Pi 5" or "compatible with Raspberry Pi 5" wording when reposting.

Tagi