Raspberry Pi 5 /Pi 4 Case VESA 75 Anmite 14 Inch Monitor Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a compact two-part mount for attaching a Raspberry Pi to the back of a monitor.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 37
- Makes
- 0
- Views
- 376
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
Raspberry Pi 5 VESA 75 Monitor Mount Case
This is a compact two-part mount for attaching a Raspberry Pi 5 to the back of a monitor.
The design is made in OpenSCAD and includes:
a base plate with the Raspberry Pi 5 mounting pattern
a separate vented lid
the editable SCAD source
printable STL files for both parts
The mount is designed for a 75 x 75 mm VESA pattern and uses 2 VESA screws in one row. It is intended as an unofficial community design for clean monitor-back installation.
Hardware
2 x M4 countersunk screws for the VESA side
3 x M4 countersunk screws for the lid
4 x M2.5 screws for mounting the Raspberry Pi 5 to the printed standoffs
Suggested screw lengths:
VESA screws: depends on your monitor insert depth
lid screws: around 12-16 mm
Raspberry Pi screws: around 6-8 mm
Please verify screw lengths against your own monitor and hardware before final assembly.
Print notes
Print both parts flat on the bed.
0.4 mm nozzle works fine.
0.2 mm layer height is a good starting point.
20-30% infill should be enough for most setups.
Check your slicer preview to decide whether you want supports for your printer and settings.
Included files
base STL
lid STL
OpenSCAD source
Notes
Designed around the Raspberry Pi 5 hole pattern.
The lid is screwed to separate posts, so the Pi mounting points stay free.
Unofficial design, not affiliated with Raspberry Pi.
Use "for Raspberry Pi 5" or "compatible with Raspberry Pi 5" wording when reposting.
