Dell H730/H330 PERC RAID Controller 40mm Fan Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
40mm Fan Bracket for DELL Perc RAID Controllers. Fits a lot of the H330 / H730 / H340 / H740 cards.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 149
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I run a home server and it's a custom build, and my H730 controller was running at 53° C year round. Designed and printed this 40mm fan bracket and used a Noctua fan, and it now runs at 39-40° C year round.
There were heat sink variations across the cards. the main contention point being how thick the heat sink is near the screws. Both my cards (an H330 and a H730) were thin at all four points. Some cards have one or two spots where it's thicker. So you may need to tinker with the design a bit.