1 / 4
Dell H730/H330 PERC RAID Controller 40mm Fan Bracket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
40mm Fan Bracket for DELL Perc RAID Controllers. Fits a lot of the H330 / H730 / H340 / H740 cards.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 45
- Makes
- 0
- Views
- 149
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I run a home server and it's a custom build, and my H730 controller was running at 53° C year round. Designed and printed this 40mm fan bracket and used a Noctua fan, and it now runs at 39-40° C year round.
There were heat sink variations across the cards. the main contention point being how thick the heat sink is near the screws. Both my cards (an H330 and a H730) were thin at all four points. Some cards have one or two spots where it's thicker. So you may need to tinker with the design a bit.