pocket operator slim case button cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Button cover for slim case designed by ceh9450 => https://www.thingiverse.com/thing:3841191 It's a case for your case!…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 511
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
Button cover for slim case designed by ceh9450 => https://www.thingiverse.com/thing:3841191
It's a case for your case! Thanks to ceh9450 for your case design!
Made this cover to protect PO from accidental presses when I throw it into my bag.
It has a spacer preventing the cover from touching the buttons on your pocket operator.
To get the print like mine I suggest using clear filament at around 0.15mm layer height.
Have 4 max top/bottom layers and have triangular infill at around 15% density.
This will make the print have nice looking visible geometric infill. AESTHETIC.
My first print had a tight fit. I printed one at 101% size and that was a little loose, adjust for your own preferences.
Also the STL file has the model sitting vertically, lay it flat in your slicer software with the large flat side down.
Category: Other