pocket operator slim case button cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Button cover for slim case designed by ceh9450 => https://www.thingiverse.com/thing:3841191 It's a case for your case!…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 15
- Makes
- 0
- Views
- 511
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
Button cover for slim case designed by ceh9450 => https://www.thingiverse.com/thing:3841191
It's a case for your case! Thanks to ceh9450 for your case design!
Made this cover to protect PO from accidental presses when I throw it into my bag.
It has a spacer preventing the cover from touching the buttons on your pocket operator.
To get the print like mine I suggest using clear filament at around 0.15mm layer height.
Have 4 max top/bottom layers and have triangular infill at around 15% density.
This will make the print have nice looking visible geometric infill. AESTHETIC.
My first print had a tight fit. I printed one at 101% size and that was a little loose, adjust for your own preferences.
Also the STL file has the model sitting vertically, lay it flat in your slicer software with the large flat side down.
Category: Other