Albright Knot Tying Aid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Albright Know Tying Aid for tying mono-filament and braided line together.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 56
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you have ever tried to tie braided line to mono-filament leader this knot aid will help keep all the ends and wraps under control.
The base needs to be fastened to a solid rest. I use the Scotty rod Holder mount by Drewes @ Rene_238031 by dropping his part to the back of the base. Them the base plate slips into a standard Scotty rod mount. Press the Posts into the base and you are ready to tie complex knots.
See:
This model also needs two M3 screws and two pen springs to cause tension in the jaw_vise_post. Insert the spring and place the M3 screw in place to assemble.
Print using PLA.