Albright Knot Tying Aid
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Albright Know Tying Aid for tying mono-filament and braided line together.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 56
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
If you have ever tried to tie braided line to mono-filament leader this knot aid will help keep all the ends and wraps under control.
The base needs to be fastened to a solid rest. I use the Scotty rod Holder mount by Drewes @ Rene_238031 by dropping his part to the back of the base. Them the base plate slips into a standard Scotty rod mount. Press the Posts into the base and you are ready to tie complex knots.
See:
This model also needs two M3 screws and two pen springs to cause tension in the jaw_vise_post. Insert the spring and place the M3 screw in place to assemble.
Print using PLA.