Disc Golf Bag Protector – Retriver Screw Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stop your retriever accessories ripping the fabric of your bag
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 48
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
Description
A very simple design. If you carry multiple interchangeable adapters for your disc retriever/telescopic pole, and just throw them in your bag, use these caps to protect the bag's fabric from ripping. Fits M5 screws on the retriever adapters.
Printing
This accessory is best printed in TPU or other FLEX materials, but PETG is also fine. I print with the standard 0.4-mm nozzle at 0.2-mm layers.
Just to be sure, I add outer brim. It may not be necessary for TPU, but better use it for PETG to help enlarge the contact patch.
Take care to check/set outer brim only so that you don't accidentally print shut the screw aperture.
Cameo
One of the photographs features my 3D-printed Disc Golf Snap Retriever. Go check out out if you don't have any such tool.