Ikea Lamp TERTIAL wall mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wall mount base for an Ikea TERTIAL with moderate modifications
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 73
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
IKEA TERTIAL Angle Poise Lamp — Wall-Mountable Smart Base
A wall-mountable base designed for the IKEA TERTIAL angle poise lamp, adding smart home integration and a cleaner, more refined build.
This project requires moderate to advanced modifications to the stock IKEA TERTIAL lamp. Key changes include:
Cable management — Cables are routed neatly from the base through to the lamp head for a clean finish. You need x2 0.3mm² 2-core flat cables.
1 for Light Power
1 for Switch
New lamp holder — A replacement light bulb holder is installed using the provided printable attachments.
A new E27 lamp holder is needed
Inline switch — A switch is mounted at the rear of the lamp holder for manual control.
Toggle switch
Smart home support — A Sonoff Mini is installed inside the base, enabling integration with smart home platforms.
Sonoff Mini R4
Earthing lug — A T-shaped brass insert is fitted into the base to provide a proper earth connection.
Brass T/P screw terminal/block
KSEN Bearings — You need two of these bearings, which will be pressed into the base. The bearing spacer must be placed between the two bearings. The sock will fit onto the lamp rod and sit snugly inside the bearings.
x2 KSEN HK14*20*16 Bearings
M3 Inserts — The rear cover on the base requires 4 M3 screws. The base has holes for M3 heat-set nut inserts.
x4 M3 Inserts
x4 M3 Screws with super flat head (1mm)