Kestrel Raptor Bird Nesting Box (huge)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pole mounted raptor friendly nesting box. Can be scaled down for smaller birds
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 56
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Animals
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed to comply with recommended specs and features of wood bird box plans from:
Kentucky Fish and Wildlife
Maryland Dept. of Natural Resources
Ohio bird sanctuary
Print details: Designed to just fit in a Prusa core 1. I tried printing this is ASA for maximum UV resilience but had too much trouble with warping since the size is huge so switched to PCTG which is almost as good with UV and gave me no warping issues. Needs two 1kg spools of filament. I do recommend also apply a coat of Krylon Fusion All-In-One Adhesive Spray Paint or similar to better seal and UV protect. White is recommended to keep baby birds from baking during summer heat. Add 2-3" of wood shavings in bottom.
Features: Ample drainage holes, internal ladder for fledglings. Flush rain keep-out vent holes. Two halves mate with 4 #6 screws.
Installation points: Designed to be attached with 2" EMT 2-hole strap but can be attached with cable ties to flagpole as I have done or screwed into a surface of course. Use two 10ft 2" EMT or a flagpole kit to get box at least 15ft high (25ft is better). Opening should face South, SE. Do NOT add perch. Kestrels don't need one and invites other birds that do which can predate eggs or chicks. YRMV: your raptor may vary. This box is also ideal size for screech owls so FCFS. If printed at 50% scale is then right size and opening for blue jays or other mid-size birds. Only put up one box. Kestrel boxes should be at least 1km away from each other.