Tripod mounted filament guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I can't keep the filament wrapped snugly against the 2kg reel since its out of balance. To avoid the unwound filament…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 130
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
I can't keep the filament wrapped snugly against the 2kg reel since its out of balance. To avoid the unwound filament to wrap around the hub and snag i felt it necessary to procure a guide that i can easily change the position of.
Print Settings
Printer Brand:
RepRap
Printer:
Ormerod 2 528.4
Rafts:
No
Supports:
No
Resolution:
0.1 mm
Infill:
15%
Notes:
If it is difficult to insert the 3/8" screw the easiest remedy is to scale the object in the x and y axis; Avoid scaling the z axis as you will change the pitch of the threads.
Category: 3D Printer Accessories