T-Slot Camera Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a version of my Universal Camera/Phone Stand that is suitable for larger cameras such as DSLR and video…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 278
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
This is a version of my Universal Camera/Phone Stand that is suitable for larger cameras such as DSLR and video cameras. It incorporates a T-slot that holds a bolt which attaches the camera using the tripod mounting hole. The t-slot allows the camera to be positioned in a stable position irrespective of the camera's centre of gravity.
The range of positions is limited to +/-45deg roll and pitch in 11.25deg intervals.
Print Settings
Printer Brand:
MakerBot
Printer:
MakerBot Replicator
Rafts:
No
Supports:
Yes
Infill:
25%
Notes:
Print the stand upside down so that the top surface is on the bed. You will need support for the centre of the t-slot.
A standard 1/4-20 UNC thread bolt, about 25mm long, is used to attach the camera. I found that a small rubber washer on the bolt between the camera and the stand made it easier to lock the camera in the desired position.Category: Camera