T-Slot Camera Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a version of my Universal Camera/Phone Stand that is suitable for larger cameras such as DSLR and video…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 14
- Makes
- 0
- Views
- 278
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
This is a version of my Universal Camera/Phone Stand that is suitable for larger cameras such as DSLR and video cameras. It incorporates a T-slot that holds a bolt which attaches the camera using the tripod mounting hole. The t-slot allows the camera to be positioned in a stable position irrespective of the camera's centre of gravity.
The range of positions is limited to +/-45deg roll and pitch in 11.25deg intervals.
Print Settings
Printer Brand:
MakerBot
Printer:
MakerBot Replicator
Rafts:
No
Supports:
Yes
Infill:
25%
Notes:
Print the stand upside down so that the top surface is on the bed. You will need support for the centre of the t-slot.
A standard 1/4-20 UNC thread bolt, about 25mm long, is used to attach the camera. I found that a small rubber washer on the bolt between the camera and the stand made it easier to lock the camera in the desired position.Category: Camera