Customizable Armrest/Shelf Table
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Little table designed to go on the arm rest on a couch or chair.
- Ocena
- 0 / 5
- Polubienia
- 122
- Pobrania
- 197
- Wydruki
- 0
- Wyświetlenia
- 1319
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This little table is designed to be used on the side of a chair or couch but can also be used as its own on a table or shelf for extra space. This little shelf provides stability for various objects that you might use such as remotes, books, cups, phones, and more. With multiple different sized compartments you have plenty of customizability for whatever you might want to put in it. In addition to books or pictures there is also a built in cup holder should you feel the need for a refreshment while watching TV or reading.
Features:
Side Compartments: Each of the four containers are designed to be able to hold various objects you might have around the house.
Container 1: Pens, pencils, highlighters, sharpies, etc...
Container 2: Phones
Container 3: Smaller books
Container 4: Bigger books
Container 5: Sketchbooks and notebooks
Customizability: With 5 possible slots this table is fully customizable in any way you want.
Stable Flat Surface & Cup Holder: Made with a stable flat top and walls, this table is the perfect piece for holding anything you put on or in it
Benefits:
Easy to put together and take apart
Frees space on any surface or provides space on chairs and couches
Modern, functional, aesthetically pleasing
Customizable depending on what user wants
Easy to install and remove no tools needed
Assembly:
Print out:
2 Walls (Your choice which ones)
Table Top
10 Pins
Any combination of compartments totaling 5 if using 1 Customizable Leg or 10 if you are using 2 customizable legs (This is only needed if you are using at least 1 Customizable Leg)
Put each pin into the holes in the table top (Make sure pins go all the way in)
Attach each leg to the table by sliding the holes onto each of the pins (When applying pressure to attach legs it is recommended you apply pressure near the top where pins are rather then middle of the leg).
If you printed out the customizable legs slide each of the chosen compartments into the designated slots
Put the table where ever you please
Print Settings:
Recommended Materials: PLA
Nozzle: .4mm
Infill: 15-20%
Supports: Shouldn't require it but might be necessary depending on you printer and its settings