1 / 2
Chonky 7in KlipperScreen Cover for Voron 350 — zdjęcie 1
1 / 2

Chonky 7in KlipperScreen Cover for Voron 350

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

With cubbies

Ocena
0 / 5
Polubienia
3
Pobrania
5
Wydruki
0
Wyświetlenia
81
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Works with some 7in touch screen with the ears on top and bottom.  I was off by 1mm (115 vs 116mm) for vertical holes but it mounted fine. 

like this one 
I got the measurements from one that didn't have a digitizer for touch but I think the screen will still fit and work if the digitizer is on. 

The overhangs are pretty brutal for the first 4mm on the face. I had to print them at 0.1mm layer height  for them to look clean. The rest I printed at 0.2mm

Mostly is so big to fit the cables under. I printed at 2 walls and 10% infill and 0.4mm nozzle