1 / 2
Chonky 7in KlipperScreen Cover for Voron 350
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
With cubbies
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 5
- Makes
- 0
- Views
- 83
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Works with some 7in touch screen with the ears on top and bottom. I was off by 1mm (115 vs 116mm) for vertical holes but it mounted fine.
like this one
I got the measurements from one that didn't have a digitizer for touch but I think the screen will still fit and work if the digitizer is on.
The overhangs are pretty brutal for the first 4mm on the face. I had to print them at 0.1mm layer height for them to look clean. The rest I printed at 0.2mm
Mostly is so big to fit the cables under. I printed at 2 walls and 10% infill and 0.4mm nozzle