DJI Mini 3 Case with remote and batteries + charger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case with the basic needs covered.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 190
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Keep everything together and tidy at for long term storage at home and in a backpack.
That means all my accessories must be in one place. The generic triple charger space is meant to be used with a sponge to keep it in place and hold your batteries while on the go.
Important note: don't charge with the charger in the case, heat will build up, damage your batteries and eventually cause fires.
Improvement notes for remixers
I suggest trying to fit all these improvements together before I try it myself. Did not accomplish everything yet as designing this thing has been somewhat of a pain.
Relocate the batteries at the top for and easier backpack access, horizontal placement could be acceptable and could help with ventilation as well.
Add a snap-in locking system for the drone cap
The same snap-in system should be used to secure the remote in the case
Leave space for https://www.printables.com/model/64821-dji-mini-3-mini-2-air-2-air2s-lanyard-mount keeping in mind it needs both horizontal and vertical clearance (remote partially open with the raised antenna and flying cables)
While you're at it, protect the controller sticks without unscrewing them