KTM 690 Supermoto Clutch Lever Safety End Stop – Prevents Push Pin Pop-Out
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Safety end stop for Super Moto clutch lever. Prevents the hydraulic push pin from popping out.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 134
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
On my KTM 690 Supermoto, the OEM clutch lever spring was so strong that when releasing the clutch, the hydraulic push pin would sometimes pop completely out. This jammed the lever and created a dangerous situation.
I designed this small, reliable end stop that sits between the handle mount and the clutch lever. It effectively limits the lever travel so the pin can no longer jump out.
Two-part design for maximum strength (optimized for 3D print layer orientation). Simple and secure installation: Insert the pin into the holder, then mount everything with a zip tie around the clutch hydraulic pipe
Printing reccomandation: use orientation from the stl file. use PETG, ASA or Nylon with very small layer height and 100% infill (for best strength and flexibility).
Use this on your own risk.