Scalpel cover for no.11 blade and no.3 handle tight fit v2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Scalpel no.3 handle and no.11 blade tight fit cover. Please download and give it a like! :)
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 119
- Wydruki
- 2
- Wyświetlenia
- 562
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Scalpel no.3 handle and no.11 blade tight fit cover
235/55 PLA %30 infill
Scalpels are not all the same. So this may be too loose or too tight for your scalpel. I draw this model to slightly tight fit to mine.
You need to remix this model and change the dimensions according to your scalpel. Besides that, while you are trying the tightness of the cover, you must have detached the blade from the handle. Do not try the cover while the blade is attached to handle.
Use raft or brim. No support.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Yes
Supports:
No
Resolution:
0.2
Infill:
30
Filament: Microzey PLA Orange
Category: R/C Vehicles