Kohler Toilet Flapper Replacement for Fluidmaster Universal Kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement plastic peice for Fluidmaster K-400H-039 flapper to make it compatible with Kohler 1-peice toilets.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 56
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
The Fluidmaster K-400H-039 kit has a 2 inch flapper which is incompatible with a Kohler 1-piece toilets because the width of the yoke on the plastic part of the flapper is not wide enough to accomodate the rectangular piece in the Kohler toilet. The rubber part of the flapper has a nib on the top which allows you to remove it from the plastic piece that came with the kit and install it into this part, which does fit the Kohler toilet. The original that I used was designed for an American Standard toilet. There are pictures of the Fluidmaster kit this comes from as well as the red plastic piece this replaces to make the kit compatible with Kohler 1-piece toilets. You'll need a clip to attach the other end of the chain to the pivot plate, I just used the clip from the old broken flapper on the new chain that came with the kit, and worked great.