Liczymy pasujące modele…
This part fits a Kohler pull-out faucet handle (Forte Kitchen Sink Faucet K-R10433 with various finishes, one UPC is 0650531224743) that is discontinued and replacement parts (K-1346768) are not readily available, or expensive. This…
This is a trip-lever handle bushing and nut for many Kohler toilet models. It is reverse threaded (lefty tighty, righty loosey) as is the original part. The stock nut should fit this replacement bushing, so only print the nut if you need…
I was replacing my flush valve, Kohler 1216610, found this big nut that was just over 4" across the flats. I don't have an adjustable big enough, so quick design and print to save the day. Print this strong, use at least 20% infill, more…
This hinge is not a perfect style replacement for the Kohler Soft Close Hinge. (It is close, but I was having trouble creating the proper curves in Solidworks.) Think of it more as a functional replacement. This is only the soft close,…
Print settings: Nozzle: .4 or .2 (The teeth that grip the valve stem require a finer nozzle), Layer Height: .16, Material: PETG/ASA/Nylon (something that does well exposed to moisture), No supports should be needed. This stem/handle…
Add the hinge pins into the part before placing the part into the rest of the bin, then use a pointy object to slide the pin in. When the pin is fully pushed in, there is a hole for a small screw ~5mm in length to be screwed in to prevent…
Hinge for Kohler toilet seat lid. Printed with PETG (ran out of white and switched to gray).
Overview A simple sponge and dishwand holder for a Kohler Brookfield 5942 Sink. Designed in OnShape printed using Prusa Mini+ with Inland White PLA. Currently using a 0.4mm nozzle so this print runs a longer that I would like. I would…
My Original Shower Kohler Devonshire insert broke, so I made a more “sturdy” one. Printing: Support: 5% density (grid) Infill: 50%-100% Layer Height: 0.2mm It should take about 15-20 minutes, using 4g of filament.
Carburetor Adapter Plate with Vacuum For Kohler SV600-3224 by RebelTaz I swapped engines on a Cub Cadet in my shop without thinking it through first. The original blown engine utilized a vacuum operated fuel pump because the tank was in…
Kohler K series Engine Points Cover, these are getting harder to find for these older motors, and when you do find them, people are asking $25 for an old rusted out part.
The Kohler BD-N450US uses an install plate from part assembly K-1321002, but the plastic rectangular inserts can break. I made a custom insert for our toilet that takes up the whole space. I've included the STEP and F360 file so that the…
This model is a direct replacement for a plastic stem driver that tends to break in some Kohler-brand shower handles. Recommend printing in PETG or ASA for strength. Original part tends to break at the edges of recessed square drive, this…
The showerhead at the clubhouse pool wouldn't aim anymore. I took it apart and found a hard plastic ring that was cleanly snapped. I modeled this in Fusion 360 to replace it and it's been working since. Print is a little stringy because I…
Shower Knob for KOHLER Freespin 2-in-1 Shower Head. This knob presses on to the directional control valve making it much easier to turn. Print in PETG.
Have you ever noticed that tricky pinch point near the foot pedal of the Kohler 47L pedal-operated garbage can? If you're a parent, you probably have, especially with little ones around. After a few too many close calls and toe-pinching…
Kohler suggests using a wrench, but as this person experienced, the aerator still wouldn't budge. I made this tool to fit, and it successfully opened my faucet. I printed it with four perimeters, 50% infill, a modifier box for 100% infill…
This replaces Sterling part number Replacement part number 1080397, Front Bushing, which allows the door to slide on the track without metal-on-metal friction. The OEM part comes with a piece of foam for the top of the bushing to prevent…
*Update 8/8/26 - What a pain in the nuts. Im about to return it but i shall not be defeated by this bathroom fixture. I went out and bought PETG and then made more adjustments. Currently, v5 is holding up the shower head and seems to work…
I needed a way to distribute weight to help my Kohler aquapiston valve in my toilet to seat to stop leaking water past. This model will allow you to slip 2 quarters into the pocket and print 3 of these to distribute weight evenly around…
A simple replacement sprayer button for the Kohler Purist Single-Handle Pullout Sprayer Kitchen Faucet.
Shower knobs that fit Kohler(and likely other) brand 16-point shower cartridges. Included the .blend file. I used Testors model paint to fill in the fire and snowflake impressions. Included stls for printing inserts as well. Edited…
A new urinal 3d printed model
I designed and used it with the Kohler GP51487 tank gasket kit, may work with others. The nut is 62mm across the flats, I've added 1mm for clearance. After hand tightening the nut, you're supposed to turn the nut an additional quarter…
Simple TPU aid to protect the nice finish on your bathroom faucet when replacing the aerator. Mine were all caked with mineral buildup and the aerators were overdue for replacing. Used this to protect the chrome plated aerator retainer…
Plastic flywheel cover to replace the one that broke on my Gravely two wheel tractor. Not the exact same dimensions or pattern as the original but it works perfectly fine. I printed it in PETG but maybe should have done ASA. I'll see how…
I installed this shower head into my shower and didn't like the secondary shower head being just below the primary shower head. I designed a mount that I could hang onto the side of my shower to hold the secondary hanger. Since the…
I printed this in white nylon, 100% infill, standing directly up with the smaller half facing downward with regular supports. Make sure you can remove the supports easily if printing with Nylon! I only recommend Nylon or PETG because of…
This is a holder for a Reach Curve flusher made out of 2 items https://www.amazon.com/gp/product/B07ZJ4B3WW/ref=sw_img_1?smid=A2XHM4QW1KJCY0&th=1 and https://www.amazon.com/dp/B01MPZEU12?ref=ppx_yo2ov_dt_b_fed_asin_title
O-ring for older Kohler Taboret faucet. This is for the base / stem segment
Vysoce kvalitní náhradní přední kolo navržené pro profesionální sekačky Weibang (specificky pro modely osazené motorem Kohler Courage XT-7 ). Originální plastová kola u těchto těžkých sekaček mají tendenci se časem opotřebovat nebo…
I have printed and install it but with an earlier version, I use nylon but petg work probably fine just need to add support at the bottom and need to remove the already existed support made in freecad
A diverter handle adapter for the Kohler Freespin Bellerose 2-in-1 multifunction shower combo kit. The original handle has only a small area for grip, making it difficult to turn with wet hands. This adapter slips over the original…
When getting my mower ready for Spring, I noticed had a fuel leak on my 23HP kohler courage engine riding mower. Fuel would weep up the screw holes and out the sides. I pulled the carburetor off and nothing looked wrong. Only after i…
Currently a work in progress. So far I have completed the cover. Still in progress and coming soon is the back plate, TPU gaskets for the cover (ones for both the printed and original covers), and a gasket for where the back plate meets…
0.5 inch spacer for Kohler Hydrorail
I designed and used it with the Kohler GP51487 tank gasket kit, may work with others. The nut is 62mm across the flats, I've added 1mm for clearance. After hand tightening the nut, you're supposed to turn the nut an additional quarter…
When getting my mower ready for Spring, I noticed had a fuel leak on my 23HP kohler courage engine riding mower. Fuel would weep up the screw holes and out the sides. I pulled the carburetor off and nothing looked wrong. Only after i…
O-ring for older Kohler Taboret faucet. This is for the base / stem segment
Wrench to aid in turning the inlet cutoff valve on a Kohler Intelligent Toilet. The cut off is a custom valve and difficult to turn, especially in my configuration facing the wall. This was done to allow a water hammer suppressor to be…
This is a printable replacement of the Kohler Air Cleaner Vacuatir Valve Part Number 24-462-11. Print in TPU. This is the first version. It fits on the motor perfectly. Will refine if improvements are need for functionality.
Cover for the Kohler Layne Toilet Seat quick release. I printed in PLA with 6 walls and 25% infill making it almost completely solid. I used arachne wall generator to get 3 walls in the compliant clip, organic thin supports, and the Orca…
This is a nut that replaces the kohl style toilet lid nut. I have created an improved version by properly modeling the threads and dropping the flexible tabs.
These are two types of drop in adapter for the slot in the Kohler 21" Floating shelf: https://techcomm.kohler.com/techcomm/pdf/K-97623_spec_US-CA_Kohler_en.pdf One is a hook that drops through for hanging cloths or a shower squeegee from.…
The Fluidmaster K-400H-039 kit has a 2 inch flapper which is incompatible with a Kohler 1-piece toilets because the width of the yoke on the plastic part of the flapper is not wide enough to accomodate the rectangular piece in the Kohler…
I needed a shower door slide guide, and quickly drew up a design before realizing that some other people may have had the same idea. I have attached an image of the relevant dimensions in case this is useful for others.
This is a simple bracket that connects the donut seat on a Kohler toilet and the lid to the bowl. Category: Bathroom
Couldn't find a reasonably priced source for the oddly sized threading on the back of a Kohler faucet I was using for an outdoor shower build, so I created my own. This nut is 15mm thick and has an internal thread of 1 ¼" - 20 UN (ANSI…
A simple tool necessary to remove the trim on a Kohler Shower Handle. No supports required,
Whipped this up as the part where the fill tube connects to the innermost shaft of the toilet valve cracked. I printed it in PETG on a Prusa Mini+, too, about an hour. 100% infill with .2 layer height. I printed it on its side so I used…
Kohler K series cam cover gasket, Printed in TPU has been holding up well.
Replacement for a toilet seat spacer. Pegs are 5.6mm in diameter and are 6.2mm in height. They are 37.4mm apart (center-to-center). Base is 50.2mmx19.0mm with a height 7.6mm.
Sand to fit. I didn't bother to make too many iterations just adjust manually.
There are a variety of designs for shower doors, but usually they slide on guides mounted to the top and bottom rails. After mine broke, I looked for suitable models but didn't find any. The original part is made out of Delrin, which…
This is a key for a Kohler generator enclosure, tested with model 14RCA . The original part is manufactured by Industrilas: Keys for insert 2-370 part number 291108 . I took measurements from the physical key and CAD file supplied by…
I had a Moen faucet wrench that worked really well that came with those faucets. I used that design as a starting point to create a wrench specific to Kohler nut sizes. Print details - Printed with an outside brim because of how tall it…
Pretty simple design. Clips on the size with some force and doesn't move around. Protects the sides of my porcelain sink so I don't end up with scratches on my porcelain Kohler Whitehaven sink from sink grate. Only uses about 1 g of…
This is a replacement key for a Kohler standby generator and many other devices. This was an exercise to create an attractive and functional item using basic OpenSCAD constructs. UPDATE: Added a wall mount, use double-sided tape to attach…
Printed in Filament PM RubberFlex 88. This is a temporary solution if original part is not available. Kohler #25 313 03-S / 25 313 02-S
Wanted a key chain for the keys to my KOHLER Generator. I could not find the official logo, so I made one in tinkercad. to change colors, at level 2.15 (14) change it to black in prusa slicer. printer out of pla with 6 layer lines 25%…
