1 / 2
Toilet Tank Gasket Wrench for Kohler Toilets, 2" pipe. 62mm across flats. — zdjęcie 1
1 / 2

Toilet Tank Gasket Wrench for Kohler Toilets, 2" pipe. 62mm across flats.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

1,23 € – 1,50 € netto (bez VAT)

Dla pliku: kohler toilet wrench_0.3mm_PLA_MK3S_1h8m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 1,37 € netto (środek widełek).

Masa podana przez autora
22 g
Czas druku podany przez autora
1,13 godz.
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

designed for the Kohler GP51487 tank gasket kit

Ocena
0 / 5
Polubienia
2
Pobrania
14
Wydruki
0
Wyświetlenia
98
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution — Share Alike

I designed and used it with the Kohler GP51487 tank gasket kit, may work with others. The nut is 62mm across the flats, I've added 1mm for clearance.

After hand tightening the nut, you're supposed to turn the nut an additional quarter turn. But the nut is recessed in the rubber, so my large wrench did not fit.

This allows you to do the additional quarter turn with no other tools.

Printed in PLA, use fat layers - there's no downside. The strength of the part shouldn't be an issue under normal circumstances, a quarter turn won't add too much force. I think you could probably print it with 1 perimeter to save about 5 grams of plastic and 10 minutes print time.

Fusion360 file included for easy modification.

Tagi