Carburetor Adapter Plate with Vacuum For Kohler SV600-3224
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Carburetor Adapter Plate with Vacuum For Kohler SV600-3224 by RebelTaz I swapped engines on a Cub Cadet in my shop…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 580
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Carburetor Adapter Plate with Vacuum For Kohler SV600-3224
by RebelTaz
I swapped engines on a Cub Cadet in my shop without thinking it through first. The original blown engine utilized a vacuum operated fuel pump because the tank was in the rear. The engine I was swapping in didn't need a pump since the mower from which it was removed had a gravity feed system. Taking a cue from motorcycle fuel pumps, I decided to try and pull vacuum for the pump from the intake manifold. This engine already had a plastic manifold, so all I had to do was make it a tad bit thicker and add a port into which I could screw a barbed fitting. To my surprise, it worked like a charm!
I printed this out of PETG at 0.2mm layer height with 1.6mm walls and 40% infill. To help seal against the gaskets, I smeared high-temp RTV silicone on both faces before installing it. All of the original hardware still fits so nothing else is needed.
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
40%
Category: Outdoor & Garden