1 / 7
Carburetor Adapter Plate with Vacuum For Kohler SV600-3224 — image 1
1 / 7

Carburetor Adapter Plate with Vacuum For Kohler SV600-3224

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Carburetor Adapter Plate with Vacuum For Kohler SV600-3224 by RebelTaz I swapped engines on a Cub Cadet in my shop…

Rating
0 / 5
Likes
6
Downloads
39
Makes
0
Views
580
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — NoDerivatives

Carburetor Adapter Plate with Vacuum For Kohler SV600-3224

by RebelTaz

I swapped engines on a Cub Cadet in my shop without thinking it through first. The original blown engine utilized a vacuum operated fuel pump because the tank was in the rear. The engine I was swapping in didn't need a pump since the mower from which it was removed had a gravity feed system. Taking a cue from motorcycle fuel pumps, I decided to try and pull vacuum for the pump from the intake manifold. This engine already had a plastic manifold, so all I had to do was make it a tad bit thicker and add a port into which I could screw a barbed fitting. To my surprise, it worked like a charm!

I printed this out of PETG at 0.2mm layer height with 1.6mm walls and 40% infill. To help seal against the gaskets, I smeared high-temp RTV silicone on both faces before installing it. All of the original hardware still fits so nothing else is needed.


Print Settings

Printer Brand:

TEVO

Printer:

Tarantula

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

40%

Category: Outdoor & Garden

Tags