Counting matching models…
I made a simple model of a lawnmower tire. Wheel diamter is 183mm. The file includes a wheel, spacer and cover. The tire has a hole made for a 13mm diameter screw. You can adjust the length with the spacer as needed. I made large notches…
Additional bumper spring to adjust the bumper force There are 2 Versions: for normal conditions for rough conditions Printed with PETG with 25% infill an 4 perimeters.
My mower's previous owner's dog chewed the height adjust knob so I wanted to make a replacement. It needs a bit of curve to it but I designed it flat so a little heat and a hammer help it go on. The tang it goes on is cupped and has a…
Can be print without support. I recommend PETG for weatherproofing it. I print it with 100% infill. OpenSCAD file is attached so it can be resized to any size you want. Either change the source file or make a comment and I will create it…
Selbstbau einer Mähroboter Garage (Carport) für weniger als 20€ Materialkosten. Die Garage ist für den WORX Landroid WR165E und ähnliche Modelle zugeschnitten. Eine Anpassung für Roboter Modelle anderer Hersteller ist leicht möglich. Für…
Honda Izy lawnmower - wheel bush - flanged Size 13mm (ID) x 27mm (OD) x 20mm deep These replacement bushes are an upgrade on the original parts. The bushings on my old Honda lawnmower all failed. I found it difficult to find replacements…
This is a simple wall mount that I used to put up a plug in lawnmower onto my garage wall. The lawnmower has 6 inch wheels and this is an 18 inch lawnmower. The mount has many opening to make it strong enough to support the weight. This…
This is a simple wall mount that I used to put up a plug in lawnmower onto my garage wall. The lawnmower has 6 inch wheels and this is for the 13 inch Ryobi lawnmower. The mount has many opening to make it strong enough to support the…
Robotic lawnmower replacement for front- and backwheel. Frontwheel with wider profile. The built tire consists of 3 parts so that it can be printed on a Prusa printer. Printed with PCTG or PETG with 20% infill an 4 perimeters. Tyres…
Description: This 3D model is a precisely designed replacement wheel for the Wolf-Garten lawn mower. It has been specifically developed for 3D printing and offers a cost-effective and practical solution if a wheel of the mower is damaged…
This adaptor is made for AL-KO Robolinho loading base stations. We use a Robolinho 550W but the same homebase comes with other AL-KO modells. Check the pics. It is a slide-on adaptor for the main tower to hold an acryllic or wooden roof…
Trampoline Leg Barrier for Robot Lawnmowers Prevent your robotic lawnmower from getting stuck on trampoline legs with this practical 3D-printed connector system! This model allows you to attach wooden slats to the legs of a trampoline,…
insulator for the lawnmower blade on a black and decker or dewalt mower.
Works better than you would think. Print first layer super slow, maybe add a bit of a glue stick swipe across. DO NOT PRINT WITH BRIM. The brim will interfere with the teeth, it will be impossible to remove the brim. I've included a photo…
Удобный держатель кабеля электропитания газонокосилки. Вешается на ручку и препятствует непредвиденному отсоединению кабеля вследствие его натяжения. Петля кабеля продевается через низ и укладывается по рельефному рисунку. Рекомендуется…
I made a lawnmower pull start handle because mine broke. I used PLA 10% infill just for the test model, but it works perfectly fine. Although i suggest PETG which is UV resistant and more durable than PLA. Adjust infill to your needs.…
It is simple Parkside battery connector for Einhell 18/30 Li lawnmower. Recomend print with PETG or ABS. Contacts dimension: 6x20-35x1 mm. Category: Outdoor & Garden
This is a fuel tank cap for some Ferrex lawnmowers. It comes with a one way valve to allow air to get inside the tank while preventing fuel from spilling out when the lawnmower is flipped for cleaning. The main body should be printed from…
I Designed simple Lawn Mower blade balancer. To create it you need only 2 berings 608, 1 screwe M4-55mm long 1 square nut M4, 4 magnets 6mmx2,6mm. Optionally 1more M4 nut & washer. Bu default you have central pin 10mm - suitable for Lawn…
This is a lawnmower wash nozzle , a specialized accessory designed to make cleaning the cutting deck of your lawnmower easier. Key Features: The image shows two variants of the nozzle (Type 1 and Type 2), These nozzles have screw-on…
A remix of Sascha4532's excellent r600 wheel, split into two parts to allow for re-printing of the tyre as and when it wears out. The main wheel body can be printed in PETG or PLA, and the tyre was printed in TPU. You can use m5 bolts to…
Remix of hegelklimbo 's original balancer that uses 608 bearings. See photos and original for assembly. Some changes I made: -Converted it to use 608 bearings & a M8 shaft. -Tightened up some tolerances. -Added some 8-32 set screw holes…
Spare wheel for garden equipment. Can be used for variety of devices. I needed them for my grill, but as long as the dimensions are right, it can be used for anything. Outer diameter: 146mm (+3mm tracks) Inner hole: 7.5mm Supports under…
The Mason 1500 is the finest piece of lawn equipment I’ve ever had the pleasure of sittin’ on. Built with good ol’ American steel and powered by a no-nonsense V-Twin engine, it cuts grass cleaner than Roger Staubach's haircut. Mason…
Hello Guys I have I created this gyro cup holder for the Milwaukee lawnmower 2823-20. Yes you can put a beer in there if you would like, but for me I typically have a spray bottle with weed killer and anytime I see a weed during my mowing…
A lawn grid to help robotic lawn mowers have more grip in certain areas. This model can be printed on Bambu printers.
Ive made this replacement for my ryobi lawnmower because the original parts cracked at the hinge point, both of them, so i made a strenghtened version, yes the lever angle is off by like 4 degrees, but that doesnt stop it from working…
Replacement Blade Disc for Lidl Parkside PMRA 20-Li B2 Robotic Lawnmower (148mm Diameter) This is a replacement disc designed for the Lidl Parkside PMRA 20-Li B2 robotic lawnmower. Please note: There are multiple versions of discs for…
A model to honor the many hours spent upon the seat of a mower… Because who doesn't want a model of a lawnmower sitting on their desk? Like, download, and comment if you want to see more models like this! (And, perhaps, if you are feeling…
I got tired of buying the easy to loose stakes for my Gardena (Husqvarna) robot's fence wire, so I designed these. They print fast, I use 2 walls and 20% infill, .03 layer height. They dont need to look great, just need to be able to be…
Hello I created this attachement for the Milwuakee Lawn Mower 2823-22HD so that you can attach the M18 Milwuakee packout fan 0818-20 With this you will need the following parts 2 X Rods 15 ¾" long with a diameter of 19.30mm (this rod can…
For 22mm diameter bar. You can adjust the holder along the bar to adjust the opening of the lid. Can be printed in PLA. No support
OLEO-MAC Lawnmower Throttle Lever 66070341AR – replacement throttle handle for lawnmowers. Designed to restore full control over engine speed, compatible with selected OLEO-MAC models. Durable and easy to install.
Hole in ring allows to put your flower inside ring, and 3 spikes need to go inside dirt(simply push em). I left 10CM above ground to block lawnmower. printed on 0.28mm layer height 15% infill with Elegoo ASA Black at 50mm/s it took me 5h…
I was not really happy with the models that i found, either the tolerance was not very good or the wheel was too small to get proper grip. This wheel is easy to attach: - Remove the plastic cover of the wheel - Unscrew the bolt. - Remove…
TPU “rubber” flap in three parts for smaller print beds to replace Part No. N482341 for popular yellow or red brands of corded or cordless electric Lawnmower: DCMW220P2 CMCMW220P2 DCMW290H1 DCMW220X2 BEMW213 CMEMW213 Line all three up in…
8 individual rollers and a spacer to replace worn out front roller PETG 0.25 layers, no supports, 3 layers perimeters as these take quite a bashing in use
Needed a replacement, and if it's worth doing, it is wort overdoing! So I designed a two-color custom hubcap for our lawnmower. A plain single-color version is also available. Print Settings Printer Brand: Prusa Printer: Prusa Clone…
Toto je náhradní rukojeť sekačky na trávu, která je určena k výměně poškozené nebo opotřebované bezpečnostní/ovládací páky u mnoha běžných sekaček na trávu s ručním pohonem. @Díl je vytištěn na 3D tiskárně a je plně funkční – montuje se…
Replacement for a broken gaz cap on lawnmower. It is print in PETG with 3 perimeter and solid layer for top was 5 Thread pitch of the cap is 3mm. Owner of lawnmowers as found no issue for now over the complete season
wider, better, stronger, nicer. Heavy print AF. Category: Hobby
My dad broke the original top cover for air filter on Parkside PBRMT 51 A1 3-wheeler lawnmower and replacement costs around 15€. So we set out to create one. I suggest to create modifiers for higher infill on the notches. Part number…
My hands were too big to be able to reach in and pull the battery from my Bosch cordless mower so I made this gadget. Designed by me in Tinkercad I printed it with supports as I had made it with curved edges to make it more comfortable to…
part that hold's the handle for the 40V battery powered Parkside lawnmower
The name says it all... 6120-603804-72 Yardworks Lawnmower sprocket The original part stripped a long time ago. That said, if you print it, print it solid or with a lot of infill. If it skips or slide, stop right away the mowing; PLA or…
The original wheelset of my lawnmower was damaged. So I have to design some new wheels and decide to give them a more sporty look. And thats the result. I hope they last as long as the the old ones (after all, these lasted 25 years).…
I designed this to replace a broken grassbox fill indicator in my old Viking MB650 lawnmower. Viking lawnmowers are now sold under the Stihl brand, but I believe they still use this indicator flap in some models. The Stihl part number is…
I've owned a Qualcast Panther 380 push lawnmower for many years. It's unbreakable, solid, and does an excellent cut. If you own one, you might already know that there are two small pinion gears inside the wheels that need replacing every…
I don't know what kind of lawnmower. They brought a broken part and asked me to do something. I did something. The first time before screwing in the screw - you need to heat it up and turn it hot. Category: Replacement Parts
This is a shift knob for the Deck Level lever on a Harmony riding mower. It will most likely fit a whole range of other applications. The threads are 5/8-11, right-hand thread. If the knob doesn't stop at the correct position once it's…
I made a simple model of a lawnmower tire. Wheel diamter is 183mm. The file includes a wheel, spacer and cover. The tire has a hole made for a 13mm diameter screw. You can adjust the length with the spacer as needed. I made large notches…
A printable replacement part for your lawn mower with a pull-start cord. Unfortunately, the original broke, so I designed this replacement part. Printed with PLA, it works great. However, PETG is recommended for its UV resistance. Have…
I use it to hang my 20V parkside lawnmower by its back wheels (I have to set the cutting height knob to lowest setting before hanging lawnmower), but I believe that it should be also compatible with other lawnmowers with 140mm wheels.
Replacement Control Lever for Lux Tools Cordless Lawn Mower The original lever is manufactured with an extremely thin cross-section at the point where it typically breaks. The original lever is too short, making breakage virtually…
Slide this over your wrapped bar tape end to keep integrity. Print in tpu. For vase mode use a .8mm nozzle and set extrusion width to 1mm.
A improved replacement part for a Bosch Rotak 43 LI lawnmower. The old style handle/bracket is no longer produced and i needed a replacement. The bracket uses a 4mm bolt + locking nut to fix the top part and bottom part together, and the…
Original design credit goes to peep111 I liked the original idea, but it had a lot of cutouts for accessories I didn't have/need, so I trimmed it down. Original also doesn't have any way to mount to a wall, as it's meant to adapt to an…
Update (v4): Since I got some feedback that it was a tight fit with the original bolts, I made some changes to the design. I made the hole for the metal bolt a little wider (0.2mm on each side), added some grips for easier tightening and…
Description from Usmar19 This is a modification of the Dremel Lawnmower blade sharpener. I redesigned it to be able to hold more flat to the blade's surface.
This part is designed and toleranced to be printed in ASA. Keep this in mind when downloading and printing! Replacement throttle lever for my 1990's Murray self propelled push mower. The arm had broken off years ago, but my father was not…
I made this because I could not find my balance after I sharpened my mower blade. I just didn't want to wait two days for delivery or run to the store when I could make it myself. Prints on my Prusa in a little more than an hour with no…
Zahrabávala se mi robotická sekačka a tyto zatravňovací dlaždice můj problém vyřešily. Dají se skládat vedle sebe, zasypat pískem a zeminou, osít trávou a nechat zarůst. Tiskl jsem je z PLA. Údajně je kompostovatelné, tak uvidíme, jak se…
Funny Lawnmower Gnome Meet the hardest-working little guy in the garden! 🌱😂 The Funny Lawnmower Gnome is ready to keep your lawn looking perfect—or at least look adorable while pretending to do it. Few supports are needed. I used…
I was sick of hand tighting knobs for my lawnmower handles that have nylon locking nuts embeded which made it pretty hard to get tight without struggle. This attachment works with 19mm wrench surely for World lawnmower knobs but I guess…
Practical cleaning tool. Designed for Terramow V1000 (V600). For cleaning wheels and blades.
I made this as a 3D printing optimized bushing to replace a failed bearing on a Kobalt 80V mower (walk-behind). Features: Press-on, press-in fit for axle and wheel. Grease holes (hexagonally shaped to avoid the need for supports)…
This is a strut I put together on tinkercad (public, link at the bottom) to fix my broken lawnmower's wheel. The original plastic wheel broke at the axle, so I put together something to be able to quickly use the device. A new wheel would…
One of the two hood bumpers went missing on my Craftsman Lawnmower hood. They weren't very expensive online, but they weren't hard to draw either...so I drew it and printed two of them in ABS. They fit better than the originals (the…
This is a dipstick for a Yardman MTD model 11A-B02J701. The part number is 951-14440. Use PETG. I printed it at .3mm and 5% infill. I included just the cap if you can't get the printer to print the tall dipstick. Print Settings Printer:…
Zum Verlegen des Mähroboterkabels mit dem Winkelschleifer den Rasen aufschneiden und mit dem Verlegerrad den Draht reindrücken. Material: Für den Zusammenbau benötigt man ein 10x10mm Alu Profilrohr oder Holzstab und eine M4 Schraube mit…
Just a small model of a lawn mower with a separate handle. Print Settings Rafts: No Supports: Yes Resolution: 0.3 mm Infill: 20% Category: Outdoor & Garden
Needed a new cable clip as i ran over the old one For 22mm Handlebar and 6mm cables Category: Outdoor & Garden
I wanted to have a blade balancer which fits a wide range of center hole diameters so that I can balance the blades of all different lawn mowers I have. In my opinion the balancing units one can buy are way too expensive so I came up with…
This is a replacement handle for Honda HRT lawnmowers. The original one broke on my mower, but the housing was not broken, so it only needed the lever part. Includes a cover for the side of the throttle lever if needed. The old lever can…
a print friendly replacement to your pull start lawnmower. My dog chewed mine up so i had to replace it. I havent printed yet cause i havent printed in ABS or PETG yet. if you print let me know how it works and if anything should be…
The fan blades all broke on my electric lawnmower so designed a version with wider, supported blades. In order to print the fan with no supports I redesigned the blade insulator to work with this specific fan. The printed fan must be used…
A replacement hinge pin for the Flymo Turbo 400 lawnmower. The original kept falling out so I designed this one. Print Settings Rafts: No Supports: No Resolution: ~0.2 Infill: 50% or more Filament: any PETG or PC original is black Notes:…
Security key for the Lidl Parkside battery powered lawnmower PRMA 40-Li A3. Print flat, no supports needed.
The original rubber came loose so we needed a replacement. It fits on the original tyre and can be screwed in place with the existing mounting holes. Printing: We used three walls and 20% infill with a layerheight of 0.3mm. For testing…
Lawnmower wheel for Husqvarna Royal 47. This model has no spare parts available, but it is stil function.
Fuel Cap for Mountfield SP180. Fits perfectly, not sure which other models it fits Print instructions Print top side down Requires supports for the underside, not internally. Use custom supports as auto support will generate supports for…
This is a large cup holder for a lawnmower built in drain holes the mounting holes are for 3mm self taping screws up to 15mm deep no supports needed 20% infill 0.3mm layer high pre sliced with a draft setting for speed
3D MODEL DESCRIPTION My father needed a blade balancer for his lawnmower blade this summer, so I designed him one. How it works: If the blade is unbalanced, one of the edges will weigh further down than the other. Then you have to remove…
Rear deck lawnmower skirt printed in two pieces then zip-tied and 3D pen welded together front and back using TPU. Filament TPU 95A
The wheel broke on the weekend, printed a new one in PETG until the replacement arrived, ended up holding the season. It broke when the trimmerline hit it, it held up until then. Printed with 6 permieters and 25% infill. PETG from…
This is the hook for wire to the Gardena robotic lawnmower, but can be used with any other brand as long as the wire fits into the pin gap. The gap for the wire is 4.2mm. Since it's for outdoor use, at least use PET-G material.
