1 / 7
40x137mm wheel for for Lawnmower, 608 skateboard bearings — image 1
1 / 7

40x137mm wheel for for Lawnmower, 608 skateboard bearings

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a wheel I designed as a replacement for my lawnmower, where the original has too much friction and a bad way…

Rating
0 / 5
Likes
7
Downloads
43
Makes
1
Views
359
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a wheel I designed as a replacement for my lawnmower, where the original has too much friction and a bad way of fixing it, so it kept getting loose. Might be useful for other projects too. It needs two 608 bearings and 8mm bolt of suficient length. It has a spacer, that you can print separately, as to keep the pressure from tightening the screw away from the bearings, but keep in mind that the plastic you're screwing against might yield. I used a regular hex nut to distance the wheel from the frame.

Printing is pretty straightforward, I used a 0.6mm nozzle, 0.8mm extrusion width, 0.4mm layer height. Uses about 100g of filament per wheel.

There is a calibration piece you can use go get your fit right, so the bearings fit well. I used random z-seam alignment do spread impecision and weak spots over the entire ring.

Category: Hobby

Tags