Troy-Bilt lawnmower wheel bushing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement bushing for the 12" rear wheels on my Troy-Bilt push lawnmower. It has a 1/2" ID and a 1 1/8" OD, with a…
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 66
- Makes
- 1
- Views
- 394
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
Replacement bushing for the 12" rear wheels on my Troy-Bilt push lawnmower. It has a 1/2" ID and a 1 1/8" OD, with a flange on the end. I made the bushing slightly longer than the original since there was room to spare and I don't want it to fail again. I also added some small grease channels.
Troy-Bilt calls these "flange bearings", but I could not locate the OE part.
Update: I would recommend to place a metal washer between the mower and this bushing when reinstalling. That should eliminate most wear.
Print Settings
Printer Brand:
Monoprice
Printer:
Maker Select Plus
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
50%
Filament: Inland PETG Black
Notes:
Using Nylon would be better for a part like this.
Category: Replacement Parts