Troy-Bilt lawnmower wheel bushing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement bushing for the 12" rear wheels on my Troy-Bilt push lawnmower. It has a 1/2" ID and a 1 1/8" OD, with a…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 66
- Wydruki
- 1
- Wyświetlenia
- 394
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Replacement bushing for the 12" rear wheels on my Troy-Bilt push lawnmower. It has a 1/2" ID and a 1 1/8" OD, with a flange on the end. I made the bushing slightly longer than the original since there was room to spare and I don't want it to fail again. I also added some small grease channels.
Troy-Bilt calls these "flange bearings", but I could not locate the OE part.
Update: I would recommend to place a metal washer between the mower and this bushing when reinstalling. That should eliminate most wear.
Print Settings
Printer Brand:
Monoprice
Printer:
Maker Select Plus
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
50%
Filament: Inland PETG Black
Notes:
Using Nylon would be better for a part like this.
Category: Replacement Parts