1 / 1
Magnetic Shower hanger for the Kohler Prone 3 in 1 secondary shower head — zdjęcie 1

Magnetic Shower hanger for the Kohler Prone 3 in 1 secondary shower head

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A magnetic shower mount designed to hang onto a shower wall for the Kohler Prone 3 in 1 which can be bought at Costco

Ocena
0 / 5
Polubienia
2
Pobrania
9
Wydruki
0
Wyświetlenia
162
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I installed this shower head into my shower and didn't like the secondary shower head being just below the primary shower head. I designed a mount that I could hang onto the side of my shower to hold the secondary hanger. Since the secondary shower head is mounted with magnets, it was fairly easy to replicate this system in my hook. 

 

The 3MF file has a filament change built in when the magnet needs to be inserted. Make sure the magnet is secure or your nozzle might pull it out. I just wedged some filament in there and tested with a piece of ferrous metal. I used a round 25x3mm neodymium magnet which does hold the shower head securely but if I were to do it again I would probably stack 2 of them together for a more secure hold.

Tagi