Magnetic Shower hanger for the Kohler Prone 3 in 1 secondary shower head
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A magnetic shower mount designed to hang onto a shower wall for the Kohler Prone 3 in 1 which can be bought at Costco
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 9
- Makes
- 0
- Views
- 163
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I installed this shower head into my shower and didn't like the secondary shower head being just below the primary shower head. I designed a mount that I could hang onto the side of my shower to hold the secondary hanger. Since the secondary shower head is mounted with magnets, it was fairly easy to replicate this system in my hook.
The 3MF file has a filament change built in when the magnet needs to be inserted. Make sure the magnet is secure or your nozzle might pull it out. I just wedged some filament in there and tested with a piece of ferrous metal. I used a round 25x3mm neodymium magnet which does hold the shower head securely but if I were to do it again I would probably stack 2 of them together for a more secure hold.