1 / 5
Kohler Toilet Fill Tube Adapter — zdjęcie 1
1 / 5

Kohler Toilet Fill Tube Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Whipped this up as the part where the fill tube connects to the innermost shaft of the toilet valve cracked.

Ocena
0 / 5
Polubienia
2
Pobrania
75
Wydruki
0
Wyświetlenia
486
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Public Domain

Whipped this up as the part where the fill tube connects to the innermost shaft of the toilet valve cracked.  I printed it in PETG on a Prusa Mini+, too, about an hour.  100% infill with .2 layer height.

I printed it on its side so I used less material and the stress of the hose “pulling” to one side might be better with layers oriented that way.  Hose is a touch snug, but wanted to make sure it stuck and didn't slip out.  Reused the foam “gasket” from the original device.

Tagi