Kohler Faucet Mounting Wrench
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sink wrench to install the nut to hold the faucet in place. Specifically for Kohler faucets
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 131
- Wydruki
- 1
- Wyświetlenia
- 947
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
I had a Moen faucet wrench that worked really well that came with those faucets. I used that design as a starting point to create a wrench specific to Kohler nut sizes.
Print details -
Printed with an outside brim because of how tall it is
2 perimeters with 20% Gyroid infill
PLA - I had a little deformation where the nut interfaced with the print after tightening. This is a one time use tool, so PLA worked great.
0.4mm layer height, but any layer height will work
Recommend printing with a 0.8mm nozzle to reduce print time.
How to use -
Slide faucet bracket over braided sink water line, stick brass nut in wrench, slide the braided sink water line through the center of the wrench, tighten nut and remove wrench.