NEMESIS X10DR X-Axis Range Extender for Sovol SV01 Printers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Best used with the Nemesis Dual Fan unit & a BMG Extruder
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 70
- Wydruki
- 3
- Wyświetlenia
- 793
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
As the BMG extruder moves your nozzle you'll need something to compensate!
Well this is it! Designed especially to be used with the Nemesis Dual Fan unit & BMG extruder, this companion range extender will give you a full 290mm of usable X axis build space! Its highly recommended not to be without it!
Also check out the Nemesis Dual Fan unit!
https://www.printables.com/model/135896-nemesis-dual-fan-unit-sovol-sv01-now-with-bmg-e3dv
Printing
Print upside-down with supports & ensure custom support is added to the rear port aperture, see sliced image above!
Install
Fit the switch PCB with the solder pad towards the base of the unit, see photo. Secure with 6-8mm Cap or Button head machine screws. Now connect the limit switch cable into the socket.
Then take 2x of the orginal long black screws from the printer & secure the unit to the printer using the left most holes on the front.
Now use 2x M3 8-10mm Counter Sunk machine screws to secure two right mountings.
Check proper operation.
I am not liable or responsible in any way for any damage caused to persons or property or indeed your printer, you use these files at your own risk.