1 / 18
Harley Davidson Action Cam Mount / Halterung - 1" 1.25" Lenker Handlebar (GoPro, ApexCam, Akaso, DJI, etc.) — zdjęcie 1
1 / 18

Harley Davidson Action Cam Mount / Halterung - 1" 1.25" Lenker Handlebar (GoPro, ApexCam, Akaso, DJI, etc.)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I got an action cam, but the mounts that came with the cam doesn't fit very well at the bike and to be honest I do not…

Ocena
5 / 5
Polubienia
41
Pobrania
141
Wydruki
1
Wyświetlenia
1434
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

I got an action cam, but the mounts that came with the cam doesn't fit very well at the bike and to be honest I do not trust them.

So I created some new mounts for the action cam. I think the holder should be identical to a number of cams (GoPro, ApexCam, Akaso, LeadEdge, Vemont, DJI and so on).

The mounts are primarily designed for Harley-Davidson but probably also fit on other bikes as well.

Here the mounts for 1" and 1.25" handlebars.

I have created versions with different lengths and a turnable holder.

The holder (bottom) and the knob are design for nut/thread inserts (M5 or similar).

Each mount contains a guide for a USB cable and in case you do not use the cable but battery, a slot for dust / water protection of the USB cam connector.

I have also created mounts for 41mm and 49mm forks.


Die Halterungen meiner Action Cam waren nicht sehr vertrauenserweckend. Außerdem passen sie nicht an die Stellen, wo ich sie anbringen möchte. Also habe ich mir einige designed.

Da viele ActionCams dieselben Aufnahmen nutzen, sollten die Halterungen auch für die meisten ActionCams passen (GoPro, ApexCam, Akaso, LeadEdge, Vemont, DJI usw.).

Hier die Halterungen 1" und 1.25" Lenker.

Ich habe Halterungen mit verschiedenen Längen und drehbarer Befestigung der Cam erstellt.

Die drehbare Halterung als auch die Knöpfe sind für Gewindeeinsätze (M5 oder vergleichbar) gedacht und designed.

Da meine Cam sowohl mit Batterie als auch direkt mit USB zu betreiben ist, habe ich die Halterungen mit einer Kabelführung als auch einer Buchse für den USB-Stecker versehen. Falls also das Kabel nicht genutzt wird, kann der USB-Stecker in die Buchse geschoben werden und ist so gegen Staub und Feuchtigkeit geschützt.

Ich habe gleich auch noch mehrere Halterungen gemacht, da ich selber noch nicht weiß, wo ich die Halterung genau positionieren werde.

Halterung für 41mm Gabel

Halterung für 49mm Gabel

https://www.thingiverse.com/thing:4956716

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

No

Supports:

No

Resolution:

0,2

Infill:

40%

Filament: PolyMaker PC, Nylon, ASA transparent, black

Category: Automotive

Tagi