Minimal Filament Rack – 6 Spools with only ~175 g Filament (Stackable & Modular)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A lightweight and space-efficient filament storage rack designed to hold 6 × 1 kg filament spools.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 106
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed this 3D printable filament rack to store filament spools in the most material-efficient and space-efficient way possible.
A complete rack for 6 × 1 kg filament spools only requires about 175 g of filament to print.
Many other designs require much more material per spool or additional hardware. This design only requires a small amount of super glue – no screws or extra parts.
Another advantage is that the rack is infinitely stackable. You can simply print additional levels and extend it vertically. I already printed extra levels myself to expand my storage.
Advantages
• Very low filament usage (~175 g per rack for 6 spools)
• No additional hardware required
• Only super glue needed
• Stackable and infinitely extendable
• Space-saving design
Important Print Notes
• The plate with the dowels must be printed with 100% infill to ensure enough strength.
• For one rack set holding 6 spools, you will need 8 dowels.
Assembly Instructions
Glue the dowels into the vertical rods using super glue.
Place the bottom plate and the top plate next to each other. Add a small amount of super glue to the edges of the dowel holes and also to the surface where the column will sit.
Assemble all parts together and wait until the glue has fully cured.