AEG BS18C2X cordless drill case replacement latch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement latch piece for an AEG cordless drill case, specifically from a BS18C2X, but might possibly fit other…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
A replacement latch piece for an AEG cordless drill case, specifically from a BS18C2X, but might possibly fit other ones. Much tighter than the original one!
Printing: put on the flat side and use a flexible material like PETG with low/disabled cooling for better layer adhesion, 0.2 mm layers, best printed solid or with high infill% and perimeter count. For nicer bridges i suggest adding supports on all overhangs. The whole print takes about 15 mins.
Note that it will be rather tight. You might need to bend the latch a bit the first few times to close it, but it will then lock quite easily
Category: Tool Holders & Boxes