AEG BS18C2X cordless drill case replacement latch
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A replacement latch piece for an AEG cordless drill case, specifically from a BS18C2X, but might possibly fit other…
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 21
- Makes
- 0
- Views
- 49
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
A replacement latch piece for an AEG cordless drill case, specifically from a BS18C2X, but might possibly fit other ones. Much tighter than the original one!
Printing: put on the flat side and use a flexible material like PETG with low/disabled cooling for better layer adhesion, 0.2 mm layers, best printed solid or with high infill% and perimeter count. For nicer bridges i suggest adding supports on all overhangs. The whole print takes about 15 mins.
Note that it will be rather tight. You might need to bend the latch a bit the first few times to close it, but it will then lock quite easily
Category: Tool Holders & Boxes