G4 Cube AirPort Bracket Blanking Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Don't have the AirPort bracket? Need to remove it? Use this to fill the space!
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 28
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
When I was building my absolutely overbuilt G4 Cube, I had an issue: I needed to remove the AirPort bracket to fit my SSD bracket in. Fair enough, since I don't use wireless networking on these old machines anyway.
However, seeing as I'm using a clear chassis with my Cube, and seeing as the AirPort bracket helps hold some cables in place, I didn't want to just delete it and leave nothing there. So I made this. You can print it in whatever color you like. I designed it to be 2mm thick to match the stock bracket but it might print a little over that; consider scaling Z in your slicer a touch to account for this (if you're putting this in a stock chassis)
Fairly simple print. Wanted to fillet all the edges but unfortunately Tinkercad was being kinda difficult. Hopefully the partial filleting is okay.
(Note: The picture of this on my Cube is a customized one-off I made for my Cube project. The file you're downloading here is free of any text.)